当前位置: 首页 > 师资队伍 > 教授 > 正文
沈平

发布日期:2017-10-18 作者: 编辑: 点击:

 

基本情况
姓名: 沈平  
性别:
职称: 教授
所在系别: 材料加工工程系
是否博导:
最高学历: 博士研究生
最高学位: 工学博士
电话:
Email:


 

详细情况
所在学科专业: 材料加工工程
所研究方向: 先进材料的润湿与连接;轻质高强韧仿生复合材料;材料合成与烧结新技术;3D打印陶瓷及其复合材料
讲授课程: 材料成型及控制工程专业外语/必修课    本科生    56学时
材料的界面/选修课       本科生     24学时
液态成型研究新进展      本科生     2/24学时
科技论文写作            研究生     20/40学时
教育经历: 1991.09 -1995.07  吉林工业大学 金属材料工程系焊接专业      学士
1995.09 -1998.04  吉林工业大学 材料加工工程专业            硕士
1998.08 -2001.10  吉林大学     材料加工工程专业            博士
工作经历: 2001.11-2002.10  日本大阪大学接合科学研究所      客员研究员(博士后)
2002.11-2004.03  日本大阪大学接合科学研究所      讲师 特任教员(COE)
2004.04-2005.04  日本大阪大学接合科学研究所      特任研究员
2005. 10-至今    吉林大学材料科学与工程学院      教 授
2006. 06-至今    吉林大学材料科学与工程学院      博士生导师
科研项目:

1) 离心定向冷冻-熔体浸渗制备受生物启发的梯度异质复合材料, 国家自然科学基金面上项目(No. 52071155), 2021.01-2024.12, 负责人。

2) 电化学驱动金属/氧化锆界面结合与调控, 国家自然科学基金面上项目(No. 51871110), 2019.01-2022.12, 负责人。

3) 基于冰模板构筑仿珍珠贝结构的高强韧金属-陶瓷复合材料, 国家自然科学基金面上项目(No. 51571099), 2016.01-2019.12, 负责人。

4) 电流作用下电子/离子导电系固-液界面的润湿、传质与结构演变, 国家自然科学基金面上项目(No. 51271085), 2013.1-2016.12, 负责人。

5) 锡钎料在亚稳结构表面的润湿行为与微观机制,国家自然科学基金面上项目(No. 51071076), 2011.1-2013.12, 负责人。

6) 熔融镁在陶瓷上的润湿及蒸发和晶体取向的影响,国家自然科学基金面上项目(No. 50871045), 2009.1-2011.12, 负责人。

7) 非连续增强金属基复合材料高通量制备研发和示范应用(课题一:复合体系相容性集成计算与设计准则),国家重点研发计划 (No. 2017YFB0703101),2017.07-2021.06, 子项负责人。  

8) 轻质高强韧金属-陶瓷复合材料的仿生设计与可控制备,吉林省长白山学者特聘教授支持计划(No. 2015011),2017.01-2019.12, 负责人 。

9) 锡基无铅钎料的润湿性与界面化学,教育部新世纪优秀人才支持计划(No. NCET-07-0360),2008.1-2010.12, 负责人。

10) 先进金属基复合材料制备科学基础-先进金属复合材料可控复合制备理论((No. 2012CB619602), 科技部973项目,2012.1-2016.12,子项负责人。

学术论文:

5(2018.01-2022.04)发表论文 (校园网用户可使用https网址直接下载,校外通过Scihub下载), 更多论文参考:https://www.researchgate.net/profile/Ping-Shen-7/publications

2022

1. Hai-Rong Mao, Er-Ting Dong, Shen-Bao Jin, Xiao-Ming Qiu, Ping Shen*, Ultrafast high-temperature synthesis and densification of high-entropy carbides, Journal of the European Ceramic Society 42 (2022) 4053–4065 (https://doi.org/10.1016/j.jeurceramsoc.2022.03.054)

2. Jianxin Sun*, Huasen Yu, Daxin Zeng, Ping Shen*, Wire–powder–arc additive manufacturing: A viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures, Additive Manufacturing 51 (2022) 102637 (https://doi.org/10.1016/j.addma.2022.102637)

3. Ning Guo, Hui-Zhen Shen, Ping Shen*, One-step synthesis and densification of BaTiO3 by reactive cold sintering, Scripta Materialia 213 (2022) 114628 (https://doi.org/10.1016/j.scriptamat.2022.114628)

4. Ning Guo, Ming Liu, Jie-Yu Shen, Hui-Zhen Shen, Ping Shen*, Surface hydrate-assisted low- and medium-temperature sintering of MgO, Scripta Materialia 206 (2022) 114258 (https://doi.org/10.1016/j.scriptamat.2021.114258)

5. Yuan-Zhe Liang, Lin Li, Ping Shen*, Pulsed current-driven wetting of 3YSZ by liquid Cu and its mechanisms, Journal of the European Ceramic Society 42(2) (2022) 552-560 (https://doi.org/10.1016/j.jeurceramsoc.2021.10.021)

6. Lin Li, Lian-Teng Yu, Yuan-Zhe Liang, Liang Zhao, Shen-Bao Jin, Ping Shen*, Electrochemical wetting of 3YSZ by Cu and ultrafast joining with a Ni-based superalloy, Journal of the European Ceramic Society 42 (2022) 1113-1120 (https://doi.org/10.1016/j.jeurceramsoc.2021.11.007)

7. Lin Li, Yuan-Zhe Liang, Shuo-Ming Chen, Ping Shen*, Ultrafast and robust joining of 3YSZ and GH3128 superalloy using Cu interlayer under an electric field, Journal of Alloys and Compounds 890 (2022) 161893 (javascript:;)

8. Yue Cao, Guo-Cheng Xu, Ping Shen*, Flash joining of 3YSZ and 430 SS using Ag–CuO filler, Ceramics International, 48 (2022) 4005–4014 (https://doi.org/10.1016/j.ceramint.2021.10.187)

9. Ning Guo, Hui-Zhen Shen, Ping Shen*, Cold sintering of chitosan/hydroxyapatite composites, Materialia 21 (2022) 101294 (https://doi.org/10.1016/j.mtla.2021.101294)

----To be continued

2021

10. Hai-Rong Mao, Xiao-Ming Qiu, Shuo-Ming Chen, Ping Shen*, Reactive wetting of high-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 ceramic by molten 71Ag–27Cu–2Ti alloy at 1073–1273 K, Journal of the European Ceramic Society, 41(2021) 5644-5649 (https://doi.org/10.1016/j.jeurceramsoc.2021.05.011)

11. Zhi-Tao Zhao, Rui-Fen Guo, Hai-Rong Mao, Ping Shen*, Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering, Journal of the European Ceramic Society 41 (2021) 5768–5773 (https://doi.org/10.1016/j.jeurceramsoc.2021.04.053)

12. Yun-Liang Li, Rui-Fen Guo*, Zhi-Jie Hu, Ping Shen*, Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating, Materials & Design, 204 (2021) 109668 (https://doi.org/10.1016/j.matdes.2021.109668)

13. Shuo-ming Chen, Qin An, Ping Shen*, Influences of Si and Ti on the wettability and reactivity of Al/graphite system at 900oC, Materialia 16 (2021) 101060 (https://doi.org/10.1016/j.mtla.2021.101060)

14. Ning Guo, Hui-Zhen Shen; Quan Jin, Ping Shen*, Hydrated precursor-assisted densification of hydroxyapatite and its composites by cold sintering, Ceramics International 47 (2021) 14348–14353 (https://doi.org/10.1016/j.ceramint.2021.01.294)

15. Yue Cao, Guo-Cheng Xu, Lin Li, Hai-Rong Mao, Rui-Fen Guo, Ping Shen*, Flash sintering of 3YSZ and in-situ joining with 304 stainless steel using copper as an interlayer, Scripta Materialia 194 (2021) 113709 (https://doi.org/10.1016/j.scriptamat.2020.113709)

16. Hui-Zhen Shen, Ning Guo, Yun-Hong Liang, Ping Shen*, Synthesis and densification of hydroxyapatite by mechanochemically-activated reactive cold sintering, Scripta Materialia 194 (2021) 113717 (https://doi.org/10.1016/j.scriptamat.2020.113717)

17. Rui-Fen Guo, Hai-Rong Mao, Zhi-Tao Zhao, Ping Shen,* Ultrafast high-temperature sintering of bulk oxides, Scripta Materialia 193 (2021) 103–107 (https://doi.org/10.1016/j.scriptamat.2020.10.045)

18. Hai-Rong Mao, Rui-Fen Guo, Yue Cao, Shen-Bao Jin, Xiao-Ming Qiu, Ping Shen*, Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering, Journal of the European Ceramic Society 41 (2021) 2855–2860 (https://doi.org/10.1016/j.jeurceramsoc.2020.11.052)

19. Li-Kai Yang, Quan Jin, Rui-FenGuo, Ping Shen, Bio-inspired lamellar hydroxyapatite/ magnesium composites prepared by directional freezing and pressureless infiltration, Ceramics International 47 (2021) 11183–11192 (https://doi.org/10.1016/j.ceramint.2020.12.242)

20. Rui-Fen Guo, Ya Wang, Yun-Hai Ma, and Ping Shen*, Role of Si in the wetting of TiC by Al, Journal of Materials Science, 56 (2021)7791-7798 (https://doi.org/10.1007/s10853-020-05496-4)

21. Hui-Zhen Shen, Yi Wang, Shuo-Ming Chen, and Ping Shen*, Wettability and reactivity between molten aluminum and randomly aligned carbon nanotubes, Journal of Materials Science, 56 (2021) 7799–7810 (https://doi.org/10.1007/s10853-020-05616-0)

22. Jia-Wei Yang, Sarina Bao, Shahid Akhtar, Ping Shen, Yan-Jun Li, Influence of Grain Refiners on the Wettability of Al2O3 Substrate by Aluminum Melt, Metallurgical and Materials Transactions B, 2021, 52(2021) 382-392 (https://doi.org/10.1007/s11663-020-01989-4)

2020

23. Zhi-Jie Hu, Rui-Fen Guo, Shuo-Ming Chen, Quan Jin, Ping Shen,* Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability, Scripta Materialia 186 (2020) 312–316 (https://doi.org/10.1016/j.scriptamat.2020.05.029)

24. Xun Sun, Rui-Fen Guo, Alateng Shaga, Zhi-Jie Hu, Ping Shen,* Zhi-Qiang Zhang,** Qi-Chuan Jiang, Preparation and characterization of high damage-tolerance nacreinspired magnesium alloy matrix composites with high carbon nanotube contents, Carbon 162 (2020) 382-391 (https://doi.org/10.1016/j.carbon.2020.02.072)

25. Rui-Fen Guo, Ya Wang, Ping Shen,* Alateng Shaga, Yun-Hai Ma, Qi-Chuan Jiang, Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites, Materials Science & Engineering A 775 (2020) 138956 (https://doi.org/10.1016/j.msea.2020.138956)

26. Hairong Mao, Ping Shen,* Guangyu Yang, Liang Zhao, Xiaoming Qiu, Huiyuan Wang,* Qichuan Jiang, 3D highly oriented metal foam: a competitive self-supporting anode for high-performance lithium-ion batteries, J Mater Sci (2020) 55:11462–11476 (https://doi.org/10.1007/s10853-020-04702-7)

27. Lin Li, Can Wei, Ping Shen*, Electrochemically driven rapid wetting of 3YSZ by 60Cu–40Ag and its robust joining to 304 stainless steel, Journal of the European Ceramic Society, 40(12) (2020) 4281-4289 (https://doi.org/10.1016/j.jeurceramsoc.2020.04.039)

28. Hui-Zhen Shen, Ning Guo, Liang Zhao, Ping Shen*, Role of ion substitution and lattice water in the densification of cold-sintered hydroxyapatite, Scripta Materialia, 177 (2020) 141–145 (https://doi.org/10.1016/j.scriptamat.2019.10.024)

29. Ming Liu, Quan Jin, Ping Shen, Cold sintering of NaNO3/MgO heat-storage composite, Ceramics International 46 (2020) 28955–28960 (https://doi.org/10.1016/j.ceramint.2020.08.066)

30. Li-Kai Yang, Quan Jin, Rui-Fen Guo, Ping Shen, Exploiting bio-inspired high energy-absorbent metal/ceramic composites through emulsion-ice-templating and melt infiltration, Materialia 14 (2020) 100884 (https://doi.org/10.1016/j.mtla.2020.100884)

2019

31. Rui-Fen Guo, Ping Shen*, Juan Zang, Yun-Hai Ma, Qi-Chuan Jiang, The influence of surface orientation on the wetting and reaction at the Al/MgAl2O4 interfaces, Ceramics International 45 (2019) 24031–24036 (https://doi.org/10.1016/j.ceramint.2019.08.106)

32. Lin Li, Kang-Zhan Cao, Ping Shen*, Qi-Chuan Jiang, Roles of direct current in ultrafast wetting of 3YSZ by Sn3.0Ag0.5Cu and joining to Ni, Materialia 7 (2019) 100399 (https://doi.org/10.1016/j.mtla.2019.100399)

33. Ni Zhang, Ping Shen*, Yue Cao, Rui–Fen Guo, Qi–ChuanJiang, Electrically induced spreading of EGaIn on Cu substrate in an alkali solution under wetting and non-wetting conditions, Applied Surface Science 490 (2019) 598–60 (https://doi.org/10.1016/j.apsusc.2019.06.084)

34. Li-Kai Yang, Ping Shen*, Rui-Fen Guo, Yun-Liang Li, Qi-Chuan Jiang, A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration, Scripta Materialia 167 (2019) 101–104 (https://doi.org/10.1016/j.scriptamat.2019.04.004)

35. Meng-Qi Sun, Ping Shen*, Qi-Chuan Jiang, Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites, Composites Part A 121(2019) 465-473 (https://doi.org/10.1016/j.compositesa.2019.04.007)

36. Yun-Liang Li, Ping Shen*, Li-Kai Yang, Xun Sun, Qi-Chuan Jiang, A novel approach to the fabrication of hierarchical Al2O3/6061Al composites with high-volume fractions of hard phases, Materials Science & Engineering A 754 (2019) 75-84 (https://doi.org/10.1016/j.msea.2019.03.065)

37. Zhi-Jie Hu , Ping Shen, Qi-Chuan Jiang, Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms, Ceramics International, 45 (2019) 11686–11693 (https://doi.org/10.1016/j.ceramint.2019.03.043)

38. Ning Guo, Ping Shen*, Rui-Fen Guo, Qi-Chuan Jiang, Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting, Materials Science & Engineering A 748 (2019) 286–293 (https://doi.org/10.1016/j.msea.2019.01.093)

39. Lin Li, Can Wei, Ping Shen,* Qi-Chuan Jiang, DC-assisted rapid wetting of PYSZ by molten 72Ag-28Cu and its application in joining, Journal of the European Ceramic Society 39 (2019) 2132–2139 (https://doi.org/10.1016/j.jeurceramsoc.2019.01.046)

40. Qin An, Xiao-shuang Cong, Ping Shen, Qi-chuan Jiang, Roles of alloying elements in wetting of SiC by Al, Journal of Alloys and Compounds 784 (2019) 1212-1220 (https://doi.org/10.1016/j.jallcom.2019.01.138)

41. Meng-Qi Sun, Ping Shen,* Qi-Chuan Jiang, Fabrication and characterization of robust freeze-cast alumina scaffolds with dense ceramic walls and controllable pore sizes, J Mater Sci 54 (2019) 5224–5235, (https://doi.org/10.1007/s10853-018-03222-9)

42. Alateng Shaga, Ping Shen, Li-Guang Xiao, Ya-Bing Liu, Effect of freeze speed on the microstructure and damage-tolerance behavior of bio-inspired ZL205A/silicon carbide composites, Materials Characterization 147 (2019) 207–214 (https://doi.org/10.1016/j.matchar.2018.11.004)

43. 邱丰, 佟昊天, 沈平, 丛晓霜, 王轶, 姜启川, 综述:SiC/Al界面反应与界面结构演变规律及机制, 金属学报 2019, Vol. 55, Issue (1): 87-100, (DOI: 10.11900/0412.1961.2018.00292)

2018

44. Shu-Li Geng, Ping Shen*, Zhi-Jie Hu, Rui-Fen Guo, Qi-Chuan Jiang, Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al2O3 ceramics under dual temperature gradients, Journal of the European Ceramic Society 38 (2018) 2605–2611 (https://doi.org/10.1016/j.jeurceramsoc.2018.01.039)

45. Rui-Fen Guo, Ning Guo, Ping Shen*, Li-Kai Yang, Qi-Chuan Jiang, Effects of ceramic lamellae compactness and interfacial reaction on the mechanical properties of nacre-inspired Al/Al2O3–ZrO2 composites, Materials Science & Engineering A 718 (2018) 326–334 (https://doi.org/10.1016/j.msea.2018.01.088)

46. Zhi-Jie Hu, Xiang-Tian Shen, Shu-Li Geng, Ping Shen,* Qi-Chuan Jiang, 3D long-range ordered porous ceramics prepared by a novel bidirectional freeze casting technique, Ceramics International 44 (2018) 5803-5806 (https://doi.org/10.1016/j.ceramint.2017.12.130)

47. Lian-Teng Yu, Ping Shen*, Bo Yang, Rui-Fen Guo, Ni Zhang, Qichuan Jiang, Polarity effects on the wettability and interfacial chemistry at Cu–YSZ interface by applying a direct current, Journal of the European Ceramic Society 38 (2018) 1790–1795 (https://doi.org/10.1016/j.jeurceramsoc.2017.10.049)

48. Rui-Fen Guo, Ping Shen*, Bo Yang, Lian-Teng Yu, Qi-Chuan Jiang, Current-driven spontaneous infiltration of molten Al into a porous PSZ preform with a lamellar structure, Materials Letters 216 (2018) 212–215 (https://doi.org/10.1016/j.matlet.2018.01.039)

49. Li-Kai Yang, Ping Shen*, Rui-Fen Guo, Qi-Chuan Jiang, The role of TiO2 incorporation in the preparation of B4C/Al laminated composites with high strength and toughness, Ceramics International 44 (2018) 15219–15227 (https://doi.org/10.1016/j.ceramint.2018.05.163)

50. Hai-Rong Mao, Ping Shen*, Yu-Hua Liu, Yu-Guang Zhao, Qi-Chuan Jiang, Nacre-inspired lightweight and high-strength AZ91D/Mg2B2O5w composites prepared by ice-templating and pressureless infiltration, J Mater Sci (2018) 53: 12167–12177 (https://doi.org/10.1007/s10853-018-2491-1)

51. Rui-Fen Guo, Ping Shen*, Ning Guo, Li-Kai Yang, Qi-Chuan Jiang, Al–7Si–5Cu/Al2O3–ZrO2 Laminated Composites with Excellent and Anisotropic Wear Resistance, Adv. Eng. Mater. 2018, 1800540 (https://doi.org/10.1002/adem.201800540)

52. Jianxin Sun*, Ping Shen*, Daxin Zeng, High wear-resistant aluminum matrix composite layer fabricated by MIG welding with lateral B4C powder injection, Journal of Materials Engineering and Performance, JMEPEG (2018) 27:5700–5708 (javascript:;)

早期发表在Acta MaterialiaScripta Materialia代表性论文:

1. Qiaoli Lin, Ping Shen*, Longlong Yang, Shenbao Jin, Qichuan Jiang, “Wetting of TiC by molten Al at 1123–1323 K” Acta Mater., 59 (2011) 1898–1911

2. Ping Shen*, Hidetoshi Fujii, Kiyoshi Nogi, “Wettability of polycrystalline rutile titania by molten aluminum in different atmospheres,” Acta Mater., 2006, 54, 1559–1569

3. Ping Shen*, Hidetoshi Fujii, Kiyoshi Nogi, “Wetting and reaction of MgO single crystals by molten Al at 1073-1473K”, Acta Mater., 2004, 52(4), 887-898.

4. Ping Shen*, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “The influence of surface structure on wetting of a-alumina by Al in a reduced atmosphere,” Acta Mater., 2003, vol. 51(16), 4897-4906

5. Bo Yang, Ping Shen*, Lian-Teng Y, Rui-Fen Guo, Qi-Chuan Jiang, Electrochemically-driven direct joining of Ni and ZrO2, Scripta Materialia 141 (2017) 41–44

6. Yanwei Zhao, Yujin Wang, Yu Zhou, Ping Shen, “Reactive wetting and infiltration of polycrystalline WC by molten Zr2Cu alloy,” Scripta Materialia, 64 (2011) 229–232.

7. Qiaoli Lin, Ping Shen*, Feng Qiu, Dan Zhan, Qichuan Jiang, “Wetting of polycrystalline B4C by molten Al at 1173-1473 K,” Scripta Mater., 60 (2009) 960–963.

8. Tao Liu, Ping Shen, Feng Qiu, Zhongfa Yin, Qiaoli Lin, Qichuan Jiang and Tao Zhang, “Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites,” Scripta Mater., 60 (2009) 84–87

9. Ping Shen*, Hidetoshi Fujii, Kiyoshi Nogi, “Wetting, adhesion and diffusion in Cu-Al/SiO2 System,” Scripta. Mater., 52(2005)1259-1263

10. Ping Shen*, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Wetting of a-Al2O3 (0001) single crystals by molten Al”, Scripta Mater., 48(2003)779-784

11. Ping Shen*, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Reactive wetting of molten Al on different oriented a-Al2O3 single crystals at high temperatures,” Scripta Mater., 49(2003)563-569

12. P. Shen, Z.X. Guo, J.D. Hu, J.S. Lian and B.Y. Sun, “Study on laser ignition of Ni-33at%Al powder compacts,” Scripta Mater., 43 (2000) 893-898.

社会兼职: 高温毛细力(High Temperature Capillarity, HTC)国际科学委员会委员

 

上一篇:张培萍

下一篇:葛文伟

友情链接